Created on
The right hair extension pliers depend on your method. Tape-in uses flat tape pliers that press the whole tape evenly. Micro and nano rings use pliers that close rings and reopen them through sized holes. Keratin bonds use bond-removal pliers. For beaded and hand-tied wefts, fine needle-nose pliers clamp the bead, and a separate bead remover opens it.
We wrote this for stylists and trainees choosing pliers for the services they actually offer. IBE® teaches one method, so we cover which pliers belong to the other methods and where our own tools fit.
Which Pliers Go With Which Extension Method?
Each type of pliers is built around one kind of attachment, so start with the method you offer.
| Extension method | Pliers type | What it does | What to look for | Common mistake | Used for removal? | IBE® tool |
|---|---|---|---|---|---|---|
| Tape-in | Tape (flat sealing) pliers | Presses the tape wefts together so it adheres evenly in one squeeze | A nose wide enough for the full tape; spring tension that does not over-compress | Uneven pressure leaves weak spots that can cause slippage | No. Removal uses adhesive remover | None |
| Micro and nano rings (I-tip, stick tip, weft rings) | Ring pliers, often with 3 holes | Closes the ring; the holes reopen it for removal | A smooth closing surface sized to the ring; removal holes in the nose | Regular pliers can fold a flattened ring back on itself; a badly closed ring can crack and catch hair | Yes | None |
| Keratin bond (fusion) | Bond-removal pliers | Breaks down the bond with fewer squeezes | Textured plates, a short nose, soft grips; corrosion-resistant if used with remover solution | Using regular pliers, which take more squeezes and can corrode in remover solution | Yes | None |
| Beaded and hand-tied weft (IBE®) | Fine needle-nose pliers, plus a bead remover and crushed bead opener | Pliers clamp the bead; the Bead Remover opens it; the Crushed Bead Opener handles a crushed bead | A fine tip for bead work; a grip that stays comfortable through a full install | Clamping with the bead too far back in the pliers or not all the way in at the tip, or squeezing too fast, which can leave the bead crooked or the hair uneven inside it | Pliers: no. Bead Remover and Crushed Bead Opener: yes | IBE® Pliers, IBE® Bead Remover, IBE® Crushed Bead Opener |
The first three rows reflect general industry practice, so check your supplier's guidance for ring and bond sizes.
What Do Hair Extension Pliers Actually Do?
Hair extension pliers do up to three jobs:
- Close or press the attachment during the install
- Open or reform it during an adjustment
- Break or loosen it during removal
Some pliers handle all three (ring pliers, for example), and others only one, so a single pair rarely covers every method. Our IBE® Pliers do only the first, and separate tools open and remove beads. This allows for fast precise work depending on what service you are performing.
Tape-In Pliers: Even Pressure on the Whole Tape
Tape-in hair extension pliers press the tape so the adhesive bonds along its full length. The nose is flat or lightly textured and wide enough to cover the whole header in one squeeze, and on many models, spring tension keeps the pressure firm without over-compressing the tape.
Uneven pressure is the usual problem. The end that gets less pressure is often where the tape starts to slip before the next appointment. Tape pliers play no part in removal, since tape-ins come out with adhesive remover.

Micro and Nano Ring Pliers: Closing and Opening Rings
Micro ring pliers have a smooth surface for closing the ring and, on many models, three sized holes in the nose for opening it. A matching hole lets the ring reform into a circle and slide off. They cover three attachments:
- I-tips and stick tips: two names for the same strand, closed into a ring with a small section of natural hair.
- Nano rings: smaller rings for finer tips, so the pliers need to be sized down.
- Weft rings: a weft held along a row of rings, with the same steps repeated across the row.
Damage often happens when a ring is opened with the wrong pliers. Standard pliers can fold a flattened ring back on itself and hurt both the natural hair and the extension tip.
Bond-Removal Pliers for Keratin Extensions
Keratin bond (fusion) extensions are applied with heat or keratin glue, and pliers come in at removal. Once the remover solution softens the bond, hair extension removal pliers break it down and the strand slides out. Textured plates and a short nose break the bond in fewer squeezes, and soft grips help because a full head of bonds means a lot of repeated squeezing. Choose corrosion-resistant metal, since remover solution can corrode standard pliers.
We do not teach fusion, so follow your bond supplier's steps.
Needle-Nose Pliers for Beaded and Hand-Tied Wefts
This is the method we teach. We have three specific tools, rather than one, which allows you to work faster and with precision.
- IBE® Pliers: for clamping the bead. The ultra-fine needle-nose tip gives you precise control in beadwork, and the soft rubber grips let you clamp the bead securely with very little pressure, which reduces hand strain.
- IBE® Bead Remover: for opening each bead during removal. It is the safest way to remove your client's beads.
- IBE® Crushed Bead Opener: only for a bead that has been crushed and will not open with the Bead Remover. Never clamp it fully shut, or you could cut your client's hair.
We do not sell tape-in, ring or bond pliers, because every tool in our IBE® tools range is designed for the IBE® method only.

What to Look For When Choosing Pliers
Whatever your method, check these five things before you buy pliers or other professional hair extension tools:
- A closing surface sized to your ring or bead, so pressure lands evenly.
- A grip you can hold all day, since you squeeze over and over in one install.
- Metal that does not corrode, especially near remover solution.
- A precise tip for control over where the bead or ring sits.
- A match to the methods you actually offer.
Can You Use Regular Pliers on Hair Extensions?
Regular pliers can physically close or open an attachment, but they put the hair at risk. That includes standard needle-nose pliers from a hardware store. They are not sized to rings or beads, so they can fold a ring, damage a bead that then needs a crushed bead opener to get out, or catch natural hair. They can also corrode in remover solution.
For removal, our guide on how to remove hair extensions safely covers the steps and tools for each method.
How to Use Pliers Safely: 5 Rules
Rules 1 and 5 apply to any method. Rules 2 to 4 come from how we teach clamping in the IBE® method.
- Use the right tool for each job. Pliers close beads, and the IBE® Bead Remover or Crushed Bead Opener takes them out. On other methods, use the pliers made for that attachment.
- Seat the bead at the tip. Place it fully inside the tip, but not back in the thicker part of the pliers, where they get in the way.
- Line up before you clamp. Your body, the pliers and the bead should line up with the section, so every bead is consistent.
- Clamp slowly and with control. A fast squeeze can leave the bead crooked and the hair uneven inside it. Clamp firmly enough that the bead holds securely, but do not over-squeeze.
- Work in small sections and keep the tool away from the scalp. If natural hair catches in the jaws, open the tool and reset instead of pulling through.

These rules cover handling only. Placement, tension and the rest of the IBE® technique are taught in certification.
Where Pliers Fit in Your Extension Tool Kit
Pliers are only one of the hair extension tools in a hand-tied kit. You also need C curve weaving needles, thread, a bead threader, weft clips and extension removal scissors. Our list of must-have tools for hand-tied extensions explains each one.
If you want to learn the method our pliers and tools are built for, IBE® certification takes you from mannequin practice to a final live-model test-out, with a 1:1 mentor reviewing your work.
Frequently Asked Questions | Hair Extension Pliers for Stylists
Can I remove hair extensions using pliers?
Yes, for most methods, if you use the pliers made for that method. Ring pliers reopen micro and nano rings, and bond-removal pliers break down softened keratin bonds. Tape-ins need adhesive remover, and IBE® beads are opened with the IBE® Bead Remover. Our guide on how to remove hair extensions safely has the steps.
What is the best tool to remove hair extensions?
Each method has its own: adhesive remover for tape-ins, ring pliers for micro and nano rings, and bond-removal pliers with remover solution for keratin bonds. For IBE® beads, use the IBE® Bead Remover, or the IBE® Crushed Bead Opener for a crushed bead.
What tools do I need to install hair extensions?
It depends on the method. Tape-ins need tape pliers and micro rings need ring pliers, while hand-tied beaded wefts need fine needle-nose pliers, beads, a bead threader, C curve weaving needles, thread and weft clips.
Are tape-in pliers and bead pliers interchangeable?
No. Tape-in pliers have a wide, flat nose for pressing a whole tape, while bead pliers have a fine tip for one small bead. Swapping them can leave weak spots in the tape or a crooked bead.
How many pliers does a stylist need?
One pair for each method you offer, plus any removal tool that method needs. For the IBE® method, that means the IBE® Pliers to clamp beads, the IBE® Bead Remover to open them and the IBE® Crushed Bead Opener for crushed beads.